eSun PMMA Like Resin - Clear - 1000g
【PMMA-Like Resin】PMMA-Like Resin has transparent appearance of imitating acrylic and glass, good visual effect. The printed model is more transparent by sanding, polishing, spraying UV high-transmitting oil, achieve ultra transparency and anti-yellowing.
【Ultra Transparency and Anti-yellowing】Solved the problem that ordinary transparent resin turns yellow after printing and irradiating ultraviolet rays. Low viscosity make it easy to separate the cured resin from the uncured one, easy to post-processe.
【High Precision and Low Shrinkage】eSUN PMMA-Like Resin contains methacrylate monomers as to reduce volume shrinkage during the photocuring process, which ensures the high precision of the print model with smooth finish and clear detail.
【Fast Curing and Excellent Fluidity】405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. It has good combination of hardness and toughness, strong adhesion of the model and easy to detach after forming.
【High Compatibility】Compatible with Most of Color Screen and Monochrome Screen 3D Printers, high printing precision, no residual impurities and films. Suitable for engineering models, shell, art, glasses, lighting, hearing aids, machinery and other fields.
Specifications
Resin Model: PMMA Like Resin - Clear
Hardness: 70 D
Viscosity (27°C): 300 mPa.s
Tensile Strength: 58 Mpa
Impact Strength: 15 J/m
Flexural Strength: 30 Mpa
Elongation at Break: 10%
Density: 1.05-1.15
How to Use:
1.Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
2.Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
3.Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
4.Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more)
Safe Package:
Thickened aluminum bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.